Surplus Floor Plate
Less-Than-Prime© Steel Floor Plates
Texas Iron & Metal offers the largest supply of surplus steel in Texas, including excess steel floor plate for sale. We stock Less-Than-Prime (LTP©) steel floor plate that does not quite meet the specifications for prime steel products. Despite minor surface defects, visible imperfections, and non-standard cuts, Less-Than-Prime steel floor pieces still offer maximum slip resistance and protection. When prime steel floor plates are not a requirement, Less-Than-Prime or surplus steel floor plates offer a cost-saving alternative.
Contact one of our steel experts to help you determine if less-than-prime UM plates or prime steel flat bars are an option for your next steel job.
Filter By
thickness
finish
Floor Plate in stock
| image | sku | description | thickness | length | finish | Quantity | Add to Quote |
|---|---|---|---|---|---|---|---|
 | FP1L | 1" FLOOR PLATE (Less-Than-Prime) | |||||
| FP12L | 1/2" FLOOR PLATE (Less-Than-Prime) | |||||
| FP14L | 1/4" FLOOR PLATE (Less-Than-Prime) | |||||
| FP18L | 1/8" FLOOR PLATE (Less-Than-Prime) | |||||
| FP12GL | 12 GA FLOOR PLATE (Less-Than-Prime) | |||||
| FP14GL | 14 GA FLOOR PLATE (Less-Than-Prime) | |||||
| FP16GL | 16 GA FLOOR PLATE (Less-Than-Prime) | |||||
| FP316L | 3/16" FLOOR PLATE (Less-Than-Prime) | |||||
| FP34L | 3/4" FLOOR PLATE (Less-Than-Prime) | |||||
| FP38L | 3/8" FLOOR PLATE (Less-Than-Prime) | |||||
| FP516L | 5/16" FLOOR PLATE (Less-Than-Prime) | |||||
| FP58L | 5/8" FLOOR PLATE (Less-Than-Prime) |
Frequently Asked Questions
LTP© is the term we use for any type of material that may not be in good enough condition to be sold as prime quality. It could be overstock, odd size, rusty, clean, pitted, damaged, reject, miscut or, in some cases, just a great buy! In many cases, LTP© products don’t have mill test reports available.
While our LTP© steel and pipe is purchased in many different grades and types, we don’t sell it as a certain grade of material unless it is certified to be that grade and/or has mill test reports. In many cases, we mark the material with the information that it had mentioned on it when it came to us. We can’t be certain as to the grade, so use this information at your own risk.
Unless you need mill certification for your material or you must have very clean material, we feel that it is of a great value to buy our LTP© steel or pipe. Our customers typically save from 10-40% or more, depending on the type of material purchased.